man.bsd.lv manual page server

Manual Page Search Parameters

STGE(4) Device Drivers Manual STGE(4)

stgeSundance/Tamarack TC9021 Gigabit Ethernet device

device miibus
device stge

Alternatively, to load the driver as a module at boot time, place the following line in /boot/loader.conf:

if_stge_load="YES"

The stge driver supports the Sundance/Tamarack TC9021 Gigabit Ethernet chip.

It uses an external PHY or an external 10-bit interface.

The stge driver also supports IP/UDP/TCP checksum offload, VLAN tagging/insertion and JUMBO frame.

For more information on configuring this device, see ifconfig(8). The stge driver supports polling(4).

The stge driver supports the Sundance/Tamarack TC9021 based Gigabit Ethernet adapters, including the following:

arp(4), ifmedia(4), miibus(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8)

The stge device driver first appeared in NetBSD 1.6.

The stge driver was written by Jason R. Thorpe <thorpej@NetBSD.org> and improved by Pyun YongHyeon <yongari@freebsd.org>.

November 2, 2006 DragonFly-5.6.1