NAME
stge —
Sundance/Tamarack TC9021 Gigabit
Ethernet device
SYNOPSIS
device miibus
device stge
Alternatively, to load the driver as a module at boot time, place the following line in /boot/loader.conf:
if_stge_load="YES"
DESCRIPTION
Thestge driver supports the Sundance/Tamarack TC9021
Gigabit Ethernet chip.
It uses an external PHY or an external 10-bit interface.
The stge driver also supports IP/UDP/TCP
checksum offload, VLAN tagging/insertion and JUMBO frame.
For more information on configuring this device, see
ifconfig(8). The stge driver supports
polling(4).
HARDWARE
The stge driver supports the
Sundance/Tamarack TC9021 based Gigabit Ethernet adapters, including the
following:
- Antares Microsystems Gigabit Ethernet
- ASUS NX1101 Gigabit Ethernet
- D-Link DGE-550T Gigabit Ethernet
- IC Plus IP1000A Gigabit Ethernet
- Sundance ST-2021 Gigabit Ethernet
- Sundance ST-2023 Gigabit Ethernet
- Sundance TC9021 Gigabit Ethernet
- Tamarack TC9021 Gigabit Ethernet
SEE ALSO
arp(4), ifmedia(4), miibus(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8)
HISTORY
The stge device driver first appeared in
NetBSD 1.6.
AUTHORS
The stge driver was written by
Jason R. Thorpe
<thorpej@NetBSD.org>
and improved by Pyun YongHyeon
<yongari@freebsd.org>.