NAME
mem, kmem —
memory files and memory
controller
SYNOPSIS
mem* at mainbus0 flags 0x0000
DESCRIPTION
Themem driver controls and restricts access to the
systems memory by the hardware buses and the processor.
It also provides an interface to userland through the special files /dev/mem and /dev/kmem. Physical memory is accessed through /dev/mem, while kernel virtual memory is accessed through /dev/kmem. Access to kernel virtual addresses not currently mapped to memory will fail. On hppa, the physical memory range is always contiguous and starts at address 0; kernel virtual memory begins at address 0 as well.
Even with sufficient file system permissions, these devices can only be opened when the securelevel(7) is insecure or when the kern.allowkmem sysctl(2) variable is set.
FILES
- /dev/mem
- /dev/kmem
SEE ALSO
CAVEATS
On some systems featuring a “Viper” memory
controller, OpenBSD may not configure bus
arbitration correctly, causing the boot process to freeze during either
mem or cpu(4) device probe.
In this case, a different initialization strategy can be achieved by setting flags to 0x0001 (see boot_config(8) for details).