man.bsd.lv manual page server

DESCRIPTION

struct snmp_client {
	enum snmp_version	version;
	int			trans;	/* which transport to use */

	/* these two are read-only for the application */
	char			*cport;	/* port number as string */
	char			*chost;	/* host name or IP address as string */

	char			read_community[SNMP_COMMUNITY_MAXLEN + 1];
	char			write_community[SNMP_COMMUNITY_MAXLEN + 1];

	/* SNMPv3 specific fields */
	int32_t			identifier;
	int32_t			security_model;
	struct snmp_engine	engine;
	struct snmp_user	user;

	/* SNMPv3 Access control - VACM*/
	uint32_t		clen;
	uint8_t			cengine[SNMP_ENGINE_ID_SIZ];
	char			cname[SNMP_CONTEXT_NAME_SIZ];

	struct timeval		timeout;
	u_int			retries;

	int			dump_pdus;

	size_t			txbuflen;
	size_t			rxbuflen;

	int			fd;

	int32_t			next_reqid;
	int32_t			max_reqid;
	int32_t			min_reqid;

	char			error[SNMP_STRERROR_LEN];

	snmp_timeout_start_f	timeout_start;
	snmp_timeout_stop_f	timeout_stop;

	char			local_path[sizeof(SNMP_LOCAL_PATH)];
};

The fields of this structure are described below.

version

This is the version of SNMP to use. See bsnmplib(3) for applicable values. The default version is SNMP_V2c.

trans

If this is SNMP_TRANS_LOC_DGRAM a local datagram socket is used. If it is SNMP_TRANS_LOC_STREAM a local stream socket is used. For SNMP_TRANS_UDP a UDP socket is created. It uses the chost field as the path to the server's socket for local sockets.

cport

The SNMP agent's UDP port number. This may be a symbolic port number (from /etc/services) or a numeric port number. If this field is NULL (the default) the standard SNMP port is used. This field should not be changed directly but rather by calling snmp_client_set_port().

chost

The SNMP agent's host name, IP address or UNIX domain socket path name. If this is NULL (the default) localhost is assumed. This field should not be changed directly but rather through calling snmp_client_set_host().

read_community

This is the community name to be used for all requests except SET requests. The default is ‘public’.

write_community

The community name to be used for SET requests. The default is ‘private’.

identifier

The message identifier value to be used with SNMPv3 PDUs. Incremented with each transmitted PDU.

security_model

The security model to be used with SNMPv3 PDUs. Currently only User-Based Security model specified by RFC 3414 (value 3) is supported.

engine

The authoritive SNMP engine parameters to be used with SNMPv3 PDUs.

user

The USM SNMP user credentials to be used with SNMPv3 PDUs.

clen

The length of the context engine id to be used with SNMPv3 PDUs.

cengine

The context engine id to be used with SNMPv3 PDUs. Default is empty.

cname

The context name to be used with SNMPv3 PDUs. Default is ‘’.

timeout

The maximum time to wait for responses to requests. If the time elapses, the request is resent up to retries times. The default is 3 seconds.

retries

Number of times a request PDU is to be resent. If set to 0, the request is sent only once. The default is 3 retransmissions.

dump_pdus

If set to a non-zero value all received and sent PDUs are dumped via snmp_pdu_dump(3). The default is not to dump PDUs.

txbuflen

The encoding buffer size to be allocated for transmitted PDUs. The default is 10000 octets.

rxbuflen

The decoding buffer size to be allocated for received PDUs. This is the size of the maximum PDU that can be received. The default is 10000 octets.

fd

After calling snmp_open() this is the file socket file descriptor used for sending and receiving PDUs.

next_reqid

The request id of the next PDU to send. Used internal by the library.

max_reqid

The maximum request id to use for outgoing PDUs. The default is INT32_MAX.

min_reqid

The minimum request id to use for outgoing PDUs. Request ids are allocated linearily starting at min_reqid up to max_reqid.

error

If an error happens, this field is set to a printable string describing the error.

timeout_start

This field must point to a function setting up a one shot timeout. After the timeout has elapsed, the given callback function must be called with the user argument. The timeout_start() function must return a void * identifying the timeout.

timeout_stop

This field must be set to a function that stops a running timeout. The function will be called with the return value of the corresponding timeout_start() function.

local_path

If in local socket mode, the name of the clients socket. Not needed by the application.

In the current implementation there is a global variable

that is used by all the library functions. The first call into the library must be a call to snmp_client_init() to initialize this global variable to the default values. After this call and before calling snmp_open() the fields of the variable may be modified by the user. The modification of the chost and cport fields should be done only via the functions snmp_client_set_host() and snmp_client_set_port().

The function snmp_open() creates a UDP or UNIX domain socket and connects it to the agent's IP address and port. If any of the arguments of the call is not NULL the corresponding field in the global snmp_client is set from the argument. Otherwise the values that are already in that variable are used. The function snmp_close() closes the socket, stops all timeouts and frees all dynamically allocated resources.

The next three functions are used to create request PDUs. The function snmp_pdu_create() initializes a PDU of type op. It does not allocate space for the PDU itself. This is the responsibility of the caller. snmp_add_binding() adds bindings to the PDU and returns the (zero based) index of the first new binding. The arguments are pairs of pointer to the OIDs and syntax constants, terminated by a NULL. The call

snmp_add_binding(&pdu,
    &oid1, SNMP_SYNTAX_INTEGER,
    &oid2, SNMP_SYNTAX_OCTETSTRING,
    NULL);

adds two new bindings to the PDU and returns the index of the first one. It is the responsibility of the caller to set the value part of the binding if necessary. The functions returns -1 if the maximum number of bindings is exhausted. The function snmp_oid_append() can be used to construct variable OIDs for requests. It takes a pointer to an struct asn_oid that is to be constructed, a format string, and a number of arguments the type of which depends on the format string. The format string is interpreted character by character in the following way:

i

This format expects an argument of type asn_subid_t and appends this as a single integer to the OID.

a

This format expects an argument of type struct in_addr and appends to four parts of the IP address to the OID.

s

This format expects an argument of type const char * and appends the length of the string (as computed by strlen(3)) and each of the characters in the string to the OID.

(

N)

This format expects no argument. N must be a decimal number and is stored into an internal variable size.

b

This format expects an argument of type const char * and appends size characters from the string to the OID. The string may contain NUL characters.

c

This format expects two arguments: one of type size_t and one of type const u_char *. The first argument gives the number of bytes to append to the OID from the string pointed to by the second argument.

The function snmp_pdu_check() may be used to check a response PDU. A number of checks are performed (error code, equal number of bindings, syntaxes and values for SET PDUs). The function returns +1 if everything is ok, 0 if a NOSUCHNAME or similar error was detected, -1 if the response PDU had fatal errors and -2 if resp is NULL (a timeout occurred).

The function snmp_pdu_send() encodes and sends the given PDU. It records the PDU together with the callback and user pointers in an internal list and arranges for retransmission if no response is received. When a response is received or the retransmission count is exceeded the callback func is called with the original request PDU, the response PDU and the user argument uarg. If the retransmit count is exceeded, func is called with the original request PDU, the response pointer set to NULL and the user argument uarg. The caller should not free the request PDU until the callback function is called. The callback function must free the request PDU and the response PDU (if not NULL ).

The function snmp_receive() tries to receive a PDU. If the argument is zero, the function polls to see whether a packet is available, if the argument is non-zero, the function blocks until the next packet is received. The packet is delivered via the usual callback mechanism (non-response packets are silently dropped). The function returns 0, if a packet was received and successfully dispatched, -1 if an error occurred or no packet was available (in polling mode).

The next two functions are used to retrieve tables from SNMP agents. They use the following input structure, that describes the table:

struct snmp_table {
	struct asn_oid		table;
	struct asn_oid		last_change;
	u_int			max_iter;
	size_t			entry_size;
	u_int			index_size;
	uint64_t		req_mask;

	struct snmp_table_entry {
	    asn_subid_t		subid;
	    enum snmp_syntax	syntax;
	    off_t		offset;
	}			entries[];
};

The fields of this structure have the following meaning:

table

This is the base OID of the table.

last_change

Some tables have a scalar variable of type TIMETICKS attached to them, that holds the time when the table was last changed. This OID should be the OID of this variable (without the .0 index). When the table is retrieved with multiple GET requests, and the variable changes between two request, the table fetch is restarted.

max_iter

Maximum number of tries to fetch the table.

entry_size

The table fetching routines return a list of structures one for each table row. This variable is the size of one structure and used to malloc(3) the structure.

index_size

This is the number of index columns in the table.

req_mask

This is a bit mask with a 1 for each table column that is required. Bit 0 corresponds to the first element (index 0) in the array entries, bit 1 to the second (index 1) and so on. SNMP tables may be sparse. For sparse columns the bit should not be set. If the bit for a given column is set and the column value cannot be retrieved for a given row, the table fetch is restarted assuming that the table is currently being modified by the agent. The bits for the index columns are ignored.

entries

This is a variable sized array of column descriptors. This array is terminated by an element with syntax SNMP_SYNTAX_NULL. The first index_size elements describe all the index columns of the table, the rest are normal columns. If for the column at ‘entries[N]’ the expression ‘req_mask & (1 << N)’ yields true, the column is considered a required column. The fields of this the array elements have the following meaning:

subid

This is the OID subid of the column. This is ignored for index entries. Index entries are decoded according to the syntax field.

syntax

This is the syntax of the column or index. A syntax of SNMP_SYNTAX_NULL terminates the array.

offset

This is the starting offset of the value of the column in the return structures. This field can be set with the ISO-C offsetof() macro.

Both table fetching functions return TAILQ (see queue(3)) of structures--one for each table row. These structures must start with a TAILQ_ENTRY() and a uint64_t and are allocated via malloc(3). The list argument of the table functions must point to a TAILQ_HEAD(). The uint64_t fields, usually called found is used to indicate which of the columns have been found for the given row. It is encoded like the req_mask field.

The function snmp_table_fetch() synchronously fetches the given table. If everything is ok 0 is returned. Otherwise the function returns -1 and sets an appropriate error string. The function snmp_table_fetch_async() fetches the tables asynchronously. If either the entire table is fetch, or an error occurs the callback function callback is called with the callers arguments list and uarg and a parameter that is either 0 if the table was fetched, or -1 if there was an error. The function itself returns -1 if it could not initialize fetching of the table.

The following table description is used to fetch the ATM interface table:

/*
 * ATM interface table
 */
struct atmif {
	TAILQ_ENTRY(atmif) link;
	uint64_t	found;
	int32_t		index;
	u_char		*ifname;
	size_t		ifnamelen;
	uint32_t	node_id;
	uint32_t	pcr;
	int32_t		media;
	uint32_t	vpi_bits;
	uint32_t	vci_bits;
	uint32_t	max_vpcs;
	uint32_t	max_vccs;
	u_char		*esi;
	size_t		esilen;
	int32_t		carrier;
};
TAILQ_HEAD(atmif_list, atmif);

/* list of all ATM interfaces */
struct atmif_list atmif_list;

static const struct snmp_table atmif_table = {
	OIDX_begemotAtmIfTable,
	OIDX_begemotAtmIfTableLastChange, 2,
	sizeof(struct atmif),
	1, 0x7ffULL,
	{
	  { 0, SNMP_SYNTAX_INTEGER,
		offsetof(struct atmif, index) },
	  { 1, SNMP_SYNTAX_OCTETSTRING,
		offsetof(struct atmif, ifname) },
	  { 2, SNMP_SYNTAX_GAUGE,
		offsetof(struct atmif, node_id) },
	  { 3, SNMP_SYNTAX_GAUGE,
		offsetof(struct atmif, pcr) },
	  { 4, SNMP_SYNTAX_INTEGER,
		offsetof(struct atmif, media) },
	  { 5, SNMP_SYNTAX_GAUGE,
		offsetof(struct atmif, vpi_bits) },
	  { 6, SNMP_SYNTAX_GAUGE,
		offsetof(struct atmif, vci_bits) },
	  { 7, SNMP_SYNTAX_GAUGE,
		offsetof(struct atmif, max_vpcs) },
	  { 8, SNMP_SYNTAX_GAUGE,
		offsetof(struct atmif, max_vccs) },
	  { 9, SNMP_SYNTAX_OCTETSTRING,
		offsetof(struct atmif, esi) },
	  { 10, SNMP_SYNTAX_INTEGER,
		offsetof(struct atmif, carrier) },
          { 0, SNMP_SYNTAX_NULL, 0 }
	}
};

...
	if (snmp_table_fetch(&atmif_table, &atmif_list) != 0)
		errx(1, "AtmIf table: %s", snmp_client.error);
...

The function snmp_dialog() is used to execute a synchonuous dialog with the agent. The request PDU req is sent and the function blocks until the response PDU is received. Note, that asynchonuous receives are handled (i.e. callback functions of other send calls or table fetches may be called while in the function). The response PDU is returned in resp. If no response could be received after all timeouts and retries, the function returns -1. If a response was received 0 is returned.

The function snmp_discover_engine() is used to discover the authoritative snmpEngineId of a remote SNMPv3 agent. A request PDU with empty USM user name is sent and the client's engine parameters are set according to the snmpEngine parameters received in the response PDU. If the client is configured to use authentication and/or privacy and the snmpEngineBoots and/or snmpEngineTime in the response had zero values, an additional request (possibly encrypted) with the appropriate user credentials is sent to fetch the missing values. Note, that the function blocks until the discovery process is completed. If no response could be received after all timeouts and retries, or the response contained errors the function returns -1. If the discovery process was completed 0 is returned.

The function snmp_parse_server() is used to parse an SNMP server specification string and fill in the fields of a struct snmp_client. The syntax of a server specification is

where trans is the transport name (one of udp, stream or dgram), community is the string to be used for both the read and the write community, server is the server's host name in case of UDP and the path name in case of a local socket, and port is the port in case of UDP transport. The function returns 0 in the case of success and return -1 and sets the error string in case of an error.