NAME
dn —
DN-11 serial autocall unit
interface
SYNOPSIS
dn0 at uba? csr 0160020 vector dnintr
DESCRIPTION
NOTE: This driver has not been ported from 4.4BSD yet.The dn device provides an interface
through a DEC DN-11 (or equivalent such as the Able Quadracall) to an
auto-call unit (ACU). To place an outgoing call one forks a sub-process
which opens the appropriate call unit file,
/dev/cua? and writes the phone number on it. The
parent process then opens the corresponding modem line
/dev/cul?. When the connection has been established,
the open on the modem line /dev/cul? will return and
the process will be connected. A timer is normally used to timeout the
opening of the modem line.
The codes for the phone numbers are:
| 0-9 | number to be dialed |
| * | dial * (`:' is a synonym) |
| # | dial # (`;' is a synonym) |
| - | delay 20 milliseconds |
| < | end of phone number (`e' is a synonym) |
| = | delay for a second dial tone (`w' is a synonym) |
| f | force a hangup of any existing connection |
The phone number to be dialed must be presented as one contiguous string.
By convention, even numbered call units are for 300 baud modem lines, while odd numbered units are for 1200 baud lines. For example, /dev/cua0 is associated with a 300 baud modem line, /dev/cul0, while /dev/cua1 is associated with a 1200 baud modem line, /dev/cul1. For devices such as the Quadracall which simulate multiple DN-11 units, the minor device indicates which outgoing modem to use.
FILES
- /dev/cua?
- call units
- /dev/cul?
- associated modem lines
DIAGNOSTICS
Two error numbers are of interest at open time.
- [
EBUSY] - The dialer is in use.
- [
ENXIO] - The device doesn't exist, or there's no power to it.
SEE ALSO
HISTORY
A dn driver appeared in
Version 6 AT&T UNIX.