man.bsd.lv manual page server

Manual Page Search Parameters
BPF(4) Device Drivers Manual BPF(4)

bpf — Berkeley Packet Filter raw network interface

pseudo-device bpfilter

The Berkeley Packet Filter provides a raw interface to data link layers in a protocol independent fashion. All packets on the network, even those destined for other hosts, are accessible through this mechanism.

The packet filter appears as a character special device, /dev/bpf. After opening the device, the file descriptor must be bound to a specific network interface with the BIOCSETIF ioctl. A given interface can be shared by multiple listeners, and the filter underlying each descriptor will see an identical packet stream.

Associated with each open instance of a bpf file is a user-settable packet filter. Whenever a packet is received by an interface, all file descriptors listening on that interface apply their filter. Each descriptor that accepts the packet receives its own copy.

Reads from these files return the next group of packets that have matched the filter. To improve performance, the buffer passed to read must be the same size as the buffers used internally by bpf. This size is returned by the BIOCGBLEN ioctl (see below), and can be set with BIOCSBLEN. Note that an individual packet larger than this size is necessarily truncated.

Since packet data is in network byte order, applications should use the byteorder(3) macros to extract multi-byte values.

A packet can be sent out on the network by writing to a bpf file descriptor. The writes are unbuffered, meaning only one packet can be processed per write. Currently, only writes to Ethernets and SLIP links are supported.

The ioctl(2) command codes below are defined in <net/bpf.h>. All commands require these includes:

#include <sys/types.h>
#include <sys/time.h>
#include <sys/ioctl.h>
#include <net/bpf.h>

Additionally, BIOCGETIF and BIOCSETIF require <net/if.h>.

The (third) argument to the ioctl(2) should be a pointer to the type indicated.

(u_int)
Returns the required buffer length for reads on bpf files.
(u_int)
Sets the buffer length for reads on bpf files. The buffer must be set before the file is attached to an interface with BIOCSETIF. If the requested buffer size cannot be accommodated, the closest allowable size will be set and returned in the argument. A read call will result in EINVAL if it is passed a buffer that is not this size.
(u_int)
Returns the type of the data link layer underlying the attached interface. EINVAL is returned if no interface has been specified. The device types, prefixed with “DLT_”, are defined in <net/bpf.h>.
(struct bpf_dltlist)
Returns an array of the available types of the data link layer underlying the attached interface: 
struct bpf_dltlist {
	u_int bfl_len;
	u_int *bfl_list;
};

The available types are returned in the array pointed to by the bfl_list field while their length in u_int is supplied to the bfl_len field. ENOMEM is returned if there is not enough buffer space and EFAULT is returned if a bad address is encountered. The bfl_len field is modified on return to indicate the actual length in u_int of the array returned. If bfl_list is NULL, the bfl_len field is set to indicate the required length of an array in u_int.

(u_int)
Changes the type of the data link layer underlying the attached interface. EINVAL is returned if no interface has been specified or the specified type is not available for the interface.
Forces the interface into promiscuous mode. All packets, not just those destined for the local host, are processed. Since more than one file can be listening on a given interface, a listener that opened its interface non-promiscuously may receive packets promiscuously. This problem can be remedied with an appropriate filter.

The interface remains in promiscuous mode until all files listening promiscuously are closed.

Flushes the buffer of incoming packets, and resets the statistics that are returned by BIOCGSTATS.
(struct ifreq)
Returns the name of the hardware interface that the file is listening on. The name is returned in the ifr_name field of ifr. All other fields are undefined.
(struct ifreq)
Sets the hardware interface associated with the file. This command must be performed before any packets can be read. The device is indicated by name using the ifr_name field of the ifreq. Additionally, performs the actions of BIOCFLUSH.
, BIOCGRTIMEOUT (struct timeval)
Sets or gets the read timeout parameter. The timeval specifies the length of time to wait before timing out on a read request. This parameter is initialized to zero by open(2), indicating no timeout.
(struct bpf_stat)
Returns the following structure of packet statistics: 
struct bpf_stat {
	uint64_t bs_recv;
	uint64_t bs_drop;
	uint64_t bs_capt;
	uint64_t bs_padding[13];
};

The fields are:

bs_recv
the number of packets received by the descriptor since opened or reset (including any buffered since the last read call);
bs_drop
the number of packets which were accepted by the filter but dropped by the kernel because of buffer overflows (i.e., the application's reads aren't keeping up with the packet traffic); and
bs_capt
the number of packets accepted by the filter.
(u_int)
Enables or disables “immediate mode”, based on the truth value of the argument. When immediate mode is enabled, reads return immediately upon packet reception. Otherwise, a read will block until either the kernel buffer becomes full or a timeout occurs. This is useful for programs like rarpd(8), which must respond to messages in real time. The default for a new file is off.
(struct bpf_program)
Sets the filter program used by the kernel to discard uninteresting packets. An array of instructions and its length are passed in using the following structure: 
struct bpf_program {
	u_int bf_len;
	struct bpf_insn *bf_insns;
};

The filter program is pointed to by the bf_insns field while its length in units of ‘struct bpf_insn’ is given by the bf_len field. Also, the actions of BIOCFLUSH are performed.

See section for an explanation of the filter language.

(struct bpf_version)
Returns the major and minor version numbers of the filter language currently recognized by the kernel. Before installing a filter, applications must check that the current version is compatible with the running kernel. Version numbers are compatible if the major numbers match and the application minor is less than or equal to the kernel minor. The kernel version number is returned in the following structure: 
struct bpf_version {
	u_short bv_major;
	u_short bv_minor;
};

The current version numbers are given by BPF_MAJOR_VERSION and BPF_MINOR_VERSION from <net/bpf.h>. An incompatible filter may result in undefined behavior (most likely, an error returned by ioctl(2) or haphazard packet matching).

, BIOCGRSIG (u_int)
Sets or gets the receive signal. This signal will be sent to the process or process group specified by FIOSETOWN. It defaults to SIGIO.
, BIOCSHDRCMPLT (u_int)
Sets or gets the status of the “header complete” flag. Set to zero if the link level source address should be filled in automatically by the interface output routine. Set to one if the link level source address will be written, as provided, to the wire. This flag is initialized to zero by default.
, BIOCSSEESENT (u_int)
These commands are obsolete but left for compatibility. Use BIOCSDIRECTION and BIOCGDIRECTION instead. Set or get the flag determining whether locally generated packets on the interface should be returned by BPF. Set to zero to see only incoming packets on the interface. Set to one to see packets originating locally and remotely on the interface. This flag is initialized to one by default.
 
(u_int) Set or get the setting determining whether incoming, outgoing, or all packets on the interface should be returned by BPF. Set to BPF_D_IN to see only incoming packets on the interface. Set to BPF_D_INOUT to see packets originating locally and remotely on the interface. Set to BPF_D_OUT to see only outgoing packets on the interface. This setting is initialized to BPF_D_INOUT by default.
, BIOCSFEEDBACK, BIOCGFEEDBACK (u_int)
Set (or get) “packet feedback mode”. This allows injected packets to be fed back as input to the interface when output via the interface is successful. The first name is meant for FreeBSD compatibility, the two others follow the Get/Set convention. Injected outgoing packets are not returned by BPF to avoid duplication. This flag is initialized to zero by default.

bpf now supports several standard ioctl(2)'s which allow the user to do async and/or non-blocking I/O to an open bpf file descriptor.

(int)
Returns the number of bytes that are immediately available for reading.
(int)
Set or clear non-blocking I/O. If arg is non-zero, then doing a read(2) when no data is available will return -1 and errno will be set to EAGAIN. If arg is zero, non-blocking I/O is disabled. Note: setting this overrides the timeout set by BIOCSRTIMEOUT.
(int)
Enable or disable async I/O. When enabled (arg is non-zero), the process or process group specified by FIOSETOWN will start receiving SIGIO's when packets arrive. Note that you must do an FIOSETOWN in order for this to take effect, as the system will not default this for you. The signal may be changed via BIOCSRSIG.
, FIOGETOWN (int)
Set or get the process or process group (if negative) that should receive SIGIO when packets are available. The signal may be changed using BIOCSRSIG (see above).

The following structure is prepended to each packet returned by read(2):

struct bpf_hdr {
	struct bpf_timeval bh_tstamp;
	uint32_t bh_caplen;
	uint32_t bh_datalen;
	uint16_t bh_hdrlen;
};

The fields, whose values are stored in host order, are:

bh_tstamp
The time at which the packet was processed by the packet filter. This structure differs from the standard struct timeval in that both members are of type long.
bh_caplen
The length of the captured portion of the packet. This is the minimum of the truncation amount specified by the filter and the length of the packet.
bh_datalen
The length of the packet off the wire. This value is independent of the truncation amount specified by the filter.
bh_hdrlen
The length of the BPF header, which may not be equal to .

The bh_hdrlen field exists to account for padding between the header and the link level protocol. The purpose here is to guarantee proper alignment of the packet data structures, which is required on alignment sensitive architectures and improves performance on many other architectures. The packet filter ensures that the bpf_hdr and the header will be word aligned. Suitable precautions must be taken when accessing the link layer protocol fields on alignment restricted machines. (This isn't a problem on an Ethernet, since the type field is a short falling on an even offset, and the addresses are probably accessed in a bytewise fashion).

Additionally, individual packets are padded so that each starts on a word boundary. This requires that an application has some knowledge of how to get from packet to packet. The macro BPF_WORDALIGN is defined in <net/bpf.h> to facilitate this process. It rounds up its argument to the nearest word aligned value (where a word is BPF_ALIGNMENT bytes wide).

For example, if ‘p’ points to the start of a packet, this expression will advance it to the next packet:

p = (char *)p + BPF_WORDALIGN(p->bh_hdrlen + p->bh_caplen)

For the alignment mechanisms to work properly, the buffer passed to read(2) must itself be word aligned. malloc(3) will always return an aligned buffer.

A filter program is an array of instructions, with all branches forwardly directed, terminated by a instruction. Each instruction performs some action on the pseudo-machine state, which consists of an accumulator, index register, scratch memory store, and implicit program counter.

The following structure defines the instruction format:

struct bpf_insn {
	uint16_t code;
	u_char 	jt;
	u_char 	jf;
	uint32_t k;
};

The k field is used in different ways by different instructions, and the jt and jf fields are used as offsets by the branch instructions. The opcodes are encoded in a semi-hierarchical fashion. There are eight classes of instructions: BPF_LD, BPF_LDX, BPF_ST, BPF_STX, BPF_ALU, BPF_JMP, BPF_RET, and BPF_MISC. Various other mode and operator bits are or'd into the class to give the actual instructions. The classes and modes are defined in <net/bpf.h>.

Below are the semantics for each defined BPF instruction. We use the convention that A is the accumulator, X is the index register, P[] packet data, and M[] scratch memory store. P[i:n] gives the data at byte offset “i” in the packet, interpreted as a word (n=4), unsigned halfword (n=2), or unsigned byte (n=1). M[i] gives the i'th word in the scratch memory store, which is only addressed in word units. The memory store is indexed from 0 to BPF_MEMWORDS-1. k, jt, and jf are the corresponding fields in the instruction definition. “len” refers to the length of the packet.

These instructions copy a value into the accumulator. The type of the source operand is specified by an “addressing mode” and can be a constant (), packet data at a fixed offset (BPF_ABS), packet data at a variable offset (BPF_IND), the packet length (), or a word in the scratch memory store (). For BPF_IND and BPF_ABS, the data size must be specified as a word (), halfword (), or byte (). Arithmetic overflow when calculating a variable offset terminates the filter program and the packet is ignored. The semantics of all the recognized BPF_LD instructions follow.
A <- P[k:4]
A <- P[k:2]
A <- P[k:1]
A <- P[X+k:4]
A <- P[X+k:2]
A <- P[X+k:1]
A <- len
A <- k
A <- M[k]
These instructions load a value into the index register. Note that the addressing modes are more restricted than those of the accumulator loads, but they include , a hack for efficiently loading the IP header length.
X <- k
X <- M[k]
X <- len
X <- 4*(P[k:1]&0xf)
This instruction stores the accumulator into the scratch memory. We do not need an addressing mode since there is only one possibility for the destination.
M[k] <- A
This instruction stores the index register in the scratch memory store.
M[k] <- X
The alu instructions perform operations between the accumulator and index register or constant, and store the result back in the accumulator. For binary operations, a source mode is required (BPF_K or BPF_X).
A <- A + k
A <- A - k
A <- A * k
A <- A / k
A <- A & k
A <- A | k
A <- A << k
A <- A >> k
A <- A + X
A <- A - X
A <- A * X
A <- A / X
A <- A & X
A <- A | X
A <- A << X
A <- A >> X
A <- -A
The jump instructions alter flow of control. Conditional jumps compare the accumulator against a constant (BPF_K) or the index register (BPF_X). If the result is true (or non-zero), the true branch is taken, otherwise the false branch is taken. Jump offsets are encoded in 8 bits so the longest jump is 256 instructions. However, the jump always () opcode uses the 32 bit k field as the offset, allowing arbitrarily distant destinations. All conditionals use unsigned comparison conventions.
pc += k
pc += (A > k) ? jt : jf
pc += (A ≥ k) ? jt : jf
pc += (A == k) ? jt : jf
pc += (A & k) ? jt : jf
pc += (A > X) ? jt : jf
pc += (A ≥ X) ? jt : jf
pc += (A == X) ? jt : jf
pc += (A & X) ? jt : jf
The return instructions terminate the filter program and specify the amount of packet to accept (i.e., they return the truncation amount). A return value of zero indicates that the packet should be ignored. The return value is either a constant (BPF_K) or the accumulator ().
accept A bytes
accept k bytes
The miscellaneous category was created for anything that doesn't fit into the above classes, and for any new instructions that might need to be added. Currently, these are the register transfer instructions that copy the index register to the accumulator or vice versa.
X <- A
A <- X

Also, two instructions to call a "coprocessor" if initialized by the kernel component. There is no coprocessor by default.

A <- funcs[k](..)
A <- funcs[X](..)

If the coprocessor is not set or the function index is out of range, these instructions will abort the program and return zero.

The BPF interface provides the following macros to facilitate array initializers:

(opcode, operand)
(opcode, operand, true_offset, false_offset)

The following sysctls are available when bpf is enabled:

Sets the maximum buffer size available for bpf peers.
Shows bpf statistics. They can be retrieved with the netstat(1) utility.
Shows the current bpf peers. This is only available to the super user and can also be retrieved with the netstat(1) utility.

On architectures with bpfjit(4) support, the additional sysctl is available:

Toggle compilation of new filter programs. In order to enable Just-In-Time compilation, the bpfjit kernel module must be loaded. Changing a value of this sysctl doesn't affect existing filter programs.

/dev/bpf

The following filter is taken from the Reverse ARP Daemon. It accepts only Reverse ARP requests.

struct bpf_insn insns[] = {
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETHERTYPE_REVARP, 0, 3),
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 20),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, REVARP_REQUEST, 0, 1),
	BPF_STMT(BPF_RET+BPF_K, sizeof(struct ether_arp) +
	    sizeof(struct ether_header)),
	BPF_STMT(BPF_RET+BPF_K, 0),
};

This filter accepts only IP packets between host 128.3.112.15 and 128.3.112.35.

struct bpf_insn insns[] = {
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETHERTYPE_IP, 0, 8),
	BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 26),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0x8003700f, 0, 2),
	BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 30),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0x80037023, 3, 4),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0x80037023, 0, 3),
	BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 30),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0x8003700f, 0, 1),
	BPF_STMT(BPF_RET+BPF_K, (u_int)-1),
	BPF_STMT(BPF_RET+BPF_K, 0),
};

Finally, this filter returns only TCP finger packets. We must parse the IP header to reach the TCP header. The instruction checks that the IP fragment offset is 0 so we are sure that we have a TCP header.

struct bpf_insn insns[] = {
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETHERTYPE_IP, 0, 10),
	BPF_STMT(BPF_LD+BPF_B+BPF_ABS, 23),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, IPPROTO_TCP, 0, 8),
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 20),
	BPF_JUMP(BPF_JMP+BPF_JSET+BPF_K, 0x1fff, 6, 0),
	BPF_STMT(BPF_LDX+BPF_B+BPF_MSH, 14),
	BPF_STMT(BPF_LD+BPF_H+BPF_IND, 14),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 79, 2, 0),
	BPF_STMT(BPF_LD+BPF_H+BPF_IND, 16),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 79, 0, 1),
	BPF_STMT(BPF_RET+BPF_K, (u_int)-1),
	BPF_STMT(BPF_RET+BPF_K, 0),
};

ioctl(2), read(2), select(2), signal(3), bpfjit(4), tcpdump(8)

S. McCanne and V. Jacobson, The BSD Packet Filter: A New Architecture for User-level Packet Capture, Proceedings of the 1993 Winter USENIX, Technical Conference, San Diego, CA.

The Enet packet filter was created in 1980 by Mike Accetta and Rick Rashid at Carnegie-Mellon University. Jeffrey Mogul, at Stanford, ported the code to BSD and continued its development from 1983 on. Since then, it has evolved into the ULTRIX Packet Filter at DEC, a STREAMS NIT module under SunOS 4.1, and BPF.

Steven McCanne, of Lawrence Berkeley Laboratory, implemented BPF in Summer 1990. The design was in collaboration with Van Jacobson, also of Lawrence Berkeley Laboratory.

The read buffer must be of a fixed size (returned by the BIOCGBLEN ioctl).

A file that does not request promiscuous mode may receive promiscuously received packets as a side effect of another file requesting this mode on the same hardware interface. This could be fixed in the kernel with additional processing overhead. However, we favor the model where all files must assume that the interface is promiscuous, and if so desired, must use a filter to reject foreign packets.

Under SunOS, if a BPF application reads more than 2^31 bytes of data, read will fail in EINVAL. You can either fix the bug in SunOS, or lseek to 0 when read fails for this reason.

“Immediate mode” and the “read timeout” are misguided features. This functionality can be emulated with non-blocking mode and select(2).

June 22, 2018 NetBSD-9.2