NAME
an —
Aironet 4500/4800 and Cisco 340/350
series wireless network driver
SYNOPSIS
an* at pcmcia? function ?
an* at pci? dev ? function ?
an* at isapnp?
DESCRIPTION
Thean driver provides support for Aironet
Communications 4500/4800 and Cisco Aironet 340/350 series wireless network
adapters. This includes the ISA, PCI and PCMCIA varieties. The 4500 series
adapters operate at 1 and 2Mbps while the 4800 series and 340/350 series can
operate at 1, 2, 5.5 and 11Mbps. The ISA, PCI and PCMCIA devices are all based
on the same core PCMCIA modules and all have the same programming interface,
however unlike the Lucent WaveLAN/IEEE cards, the ISA and PCI cards appear to
the host as normal ISA and PCI devices and do not require any PCMCIA support.
The PCMCIA Aironet cards require PCMCIA support. ISA cards can
either be configured to use ISA Plug and Play or to use a particular I/O
address and IRQ by properly setting the DIP switches on the board. (The
default switch setting is for plug and play.) The an
driver has Plug and Play support and will work in either configuration,
however when using a hard-wired I/O address and IRQ, the driver
configuration and the NIC's switch settings must agree. PCI cards require no
switch settings of any kind and will be automatically probed and
attached.
All host/device interaction with the Aironet cards is via
programmed I/O. The Aironet devices support 802.11 and 802.3 frames, power
management, BSS (infrastructure) and IBSS (ad-hoc) operation modes. The
an driver encapsulates all IP and ARP traffic as
802.11 frames, however it can receive either 802.11 or 802.3 frames.
Transmit speed is selectable between 1Mbps, 2Mbps, 5.5Mbps, 11Mbps, or
“auto” (the NIC automatically chooses the best speed).
By default, the an driver configures the
Aironet card to join an access point with an SSID of null string. For ad-hoc
mode, in which stations can communicate among each other without the aid of
an access point, the driver must be set using
ifconfig(8).
For more information on configuring this device, see ifconfig(8) and ifmedia(4).
HARDWARE
Cards supported by the an driver
include:
- Aironet 4500 Series
- Aironet 4800 Series
- Cisco Aironet 340 Series
- Cisco Aironet 350 Series
DIAGNOSTICS
- an%d: init failed
- The Aironet card failed to come ready after an initialization command was issued.
- an%d: failed to allocate %d bytes on NIC
- The driver was unable to allocate memory for transmit frames in the NIC's on-board RAM.
- an%d: device timeout
- The Aironet card failed to generate an interrupt to acknowledge a transmit command.
SEE ALSO
HISTORY
The an device driver first appeared in
FreeBSD 4.0, and then in NetBSD
1.6.
AUTHORS
The an driver was written by
Bill Paul
<wpaul@ee.columbia.edu>.