NAME
acpitz —
ACPI Thermal Zone
SYNOPSIS
acpitz* at acpi?
DESCRIPTION
Theacpitz driver supports so-called ACPI
“Thermal Zones”. The temperature can be monitored by the
envsys(4) API or the
envstat(8) command.
The distinction between “active” and
“passive” cooling is central to the abstractions behind
acpitz. These are inversely related to each
other:
- Active cooling means that the system increases the power consumption of the machine by performing active thermal management (for example, by turning on a fan) in order to reduce the temperatures.
- Passive cooling means that the system reduces the power consumption of devices at the cost of system performance (for example, by lowering the CPU frequencies) in order to reduce the temperatures.
Only active cooling is currently supported on NetBSD.
It should be also noted that the internal functioning of these cooling policies vary across machines. On some machines the operating system may have little control over the thermal zones as the firmware manages the thermal control internally, whereas on other machines the policies may be exposed to the implementation at their full extent.
EVENTS
The acpitz driver knows about the active
cooling levels, the current temperatures, and critical, hot, and passive
temperature thresholds (as supported by the hardware). The driver is able to
send events to powerd(8) when the sensor's state has changed. When a Thermal
Zone is either critical or “hot”, the
/etc/powerd/scripts/sensor_temperature script will
be invoked with a
critical-over
event.
The critical temperature is the threshold for system shutdown. Depending on the hardware, the mainboard will take down the system instantly and no event will have a chance to be sent.
SEE ALSO
HISTORY
The acpitz driver appeared in
NetBSD 2.0.
AUTHORS
Jared D. McNeill <jmcneill@invisible.ca>
CAVEATS
While no pronounced bugs are known to exist, several caveats can be mentioned:
- Passive cooling is not implemented.
- There is no user-controllable way to switch between active and passive cooling, although the specifications support such transforms on some machines.
- The “hot” temperature is a threshold in which the system ought to be put into S4 sleep. This sleep state (“suspend to disk”) is not supported on NetBSD.