NAME
ubsa —
USB support for Belkin serial
adapters
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device usb
device ucom
device ubsaAlternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
ubsa_load="YES"
DESCRIPTION
Theubsa driver provides support for the USB-to-RS232
Bridge chip used by a variety of serial adapters from Belkin and other
vendors.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The ubsa driver supports the following
adapters:
- AnyData ADU-500A EV-DO modem
- AnyData ADU-E100A (no EV-DO mode support)
- Belkin F5U103
- Belkin F5U120
- e-Tek Labs Kwik232
- GoHubs GoCOM232
- Peracom single port serial adapter
FILES
- /dev/ttyU*
- for callin ports
- /dev/ttyU*.init
- /dev/ttyU*.lock
- corresponding callin initial-state and lock-state devices
- /dev/cuaU*
- for callout ports
- /dev/cuaU*.init
- /dev/cuaU*.lock
- corresponding callout initial-state and lock-state devices
SEE ALSO
HISTORY
The ubsa driver appeared in
FreeBSD 5.0. The
uplcom(4) manual page was adopted from NetBSD
by Tom Rhodes
<trhodes@FreeBSD.org>
in April 2002 and modified for the ubsa driver by
Alexander Kabaev
<kan@FreeBSD.org> in
October 2002.
AUTHORS
The ubsa driver was written by
Alexander Kabaev
<kan@FreeBSD.org>.