man.bsd.lv manual page server

Manual Page Search Parameters

TFTPD(8) System Manager's Manual TFTPD(8)

tftpdInternet Trivial File Transfer Protocol server

tftpd [-cdClnow] [-F strftime-format] [-s directory] [-u user] [-U umask] [directory ...]

The tftpd utility is a server which supports the Internet Trivial File Transfer Protocol (RFC 1350). The TFTP server operates at the port indicated in the ‘tftp’ service description; see services(5). The server is normally started by inetd(8).

The use of tftp(1) does not require an account or password on the remote system. Due to the lack of authentication information, tftpd will allow only publicly readable files to be accessed. Files containing the string “/../” or starting with “../” are not allowed. Files may be written only if they already exist and are publicly writable. Note that this extends the concept of “public” to include all users on all hosts that can be reached through the network; this may not be appropriate on all systems, and its implications should be considered before enabling tftp service. The server should have the user ID with the lowest possible privilege.

Access to files may be restricted by invoking tftpd with a list of directories by including up to 20 pathnames as server program arguments in inetd.conf(5). In this case access is restricted to files whose names are prefixed by the one of the given directories. The given directories are also treated as a search path for relative filename requests.

The -s option provides additional security by changing the root directory of tftpd, thereby prohibiting accesses to outside of the specified directory. Because chroot(2) requires super-user privileges, tftpd must be run as root. However, after performing the chroot(2) call, tftpd will set its user ID to that of the specified user, or “nobody” if no -u option is specified.

The options are:

Changes the default root directory of a connecting host via chroot(2) based on the connecting IP address. This prevents multiple clients from writing to the same file at the same time. If the directory does not exist, the client connection is refused. The -s option is required for -c and the specified directory is used as a base.
Operates the same as -c except it falls back to directory specified via -s if a directory does not exist for the client's IP.
Use this strftime(3) compatible format string for the creation of the suffix if -W is specified. By default the string "%Y%m%d" is used.
-d [value]
Enables debug output. If value is not specified, then the debug level is increased by one for each instance of -d which is specified.

If value is specified, then the debug level is set to value. The debug level is a bitmask implemented in src/libexec/tftpd/tftp-utils.h. Valid values are 0 (DEBUG_NONE), 1 (DEBUG_PACKETS), 2, (DEBUG_SIMPLE), 4 (DEBUG_OPTIONS), and 8 (DEBUG_ACCESS). Multiple debug values can be combined in the bitmask by logically OR'ing the values. For example, specifying -d 15 will enable all the debug values.

Log all requests using syslog(3) with the facility of LOG_FTP. : Logging of LOG_FTP messages must also be enabled in the syslog configuration file, syslog.conf(5).
Suppress negative acknowledgement of requests for nonexistent relative filenames.
Disable support for RFC2347 style TFTP Options.
directory
Cause tftpd to change its root directory to directory. After doing that but before accepting commands, tftpd will switch credentials to an unprivileged user.
user
Switch credentials to user (default “nobody”) when the -s option is used. The user must be specified by name, not a numeric UID.
umask
Set the umask for newly created files. The default is 022 (S_IWGRP | S_IWOTH).
Allow write requests to create new files. By default tftpd requires that the file specified in a write request exist. Note that this only works in directories writable by the user specified with -u option
As -w but append a YYYYMMDD.nn sequence number to the end of the filename. Note that the string YYYYMMDD can be changed with the -F option.

tftp(1), chroot(2), syslog(3), inetd.conf(5), services(5), syslog.conf(5), inetd(8)

The following RFC's are supported:

RFC 1350: The TFTP Protocol (Revision 2).

RFC 2347: TFTP Option Extension.

RFC 2348: TFTP Blocksize Option.

RFC 2349: TFTP Timeout Interval and Transfer Size Options.

The non-standard rollover and blksize2 TFTP options are mentioned here:

Extending TFTP, http://www.compuphase.com/tftp.htm.

The tftpd utility appeared in 4.2BSD; the -s option was introduced in FreeBSD 2.2, the -u option was introduced in FreeBSD 4.2, the -c option was introduced in FreeBSD 4.3, and the -F and -W options were introduced in FreeBSD 7.4.

Support for Timeout Interval and Transfer Size Options (RFC2349) was introduced in FreeBSD 5.0, support for the TFTP Blocksize Option (RFC2348) and the blksize2 option was introduced in FreeBSD 7.4.

Edwin Groothuis <edwin@FreeBSD.org> performed a major rewrite of the tftpd and tftp(1) code to support RFC2348.

Files larger than 33,553,919 octets (65535 blocks, last one <512 octets) cannot be correctly transferred without client and server supporting blocksize negotiation (RFCs 2347 and 2348), or the non-standard TFTP rollover option. As a kludge, tftpd accepts a sequence of block number which wrap to zero after 65535, even if the rollover option is not specified.

Many tftp clients will not transfer files over 16,776,703 octets (32767 blocks), as they incorrectly count the block number using a signed rather than unsigned 16-bit integer.

June 22, 2011 FreeBSD-12.0