NAME
rtwn_usb
—
Realtek USB device glue
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device xhci
device ehci
device uhci
device ohci
device usb
device rtwn_usb
device wlan
DESCRIPTION
This module provides the USB bus glue needed for the devices supported by the rtwn(4) driver.HARDWARE
The rtwn_usb
driver supports Realtek
RTL8188CU/RTL8188RU/RTL8188EU/RTL8192CU/RTL8192EU/RTL8812AU/RTL8821AU based
USB wireless network adapters, including:
Card | Bus |
Alfa AWUS036NHR v2 | USB 2.0 |
ASUS USB-AC56 | USB 3.0 |
ASUS USB-N10 NANO | USB 2.0 |
Asus USB-N13, rev. B1 | USB 2.0 |
Belkin F7D1102 Surf Wireless Micro | USB 2.0 |
Buffalo WI-U2-433DM | USB 2.0 |
Buffalo WI-U3-866D | USB 3.0 |
D-Link DWA-123 rev D1 | USB 2.0 |
D-Link DWA-125 rev D1 | USB 2.0 |
D-Link DWA-131 | USB 2.0 |
D-Link DWA-131 rev E1 | USB 2.0 |
D-Link DWA-171 rev A1 | USB 2.0 |
D-Link DWA-172 rev A1 | USB 2.0 |
D-Link DWA-180 rev A1 | USB 2.0 |
D-Link DWA-182 rev C1 | USB 3.0 |
Edimax EW-7811Un | USB 2.0 |
Edimax EW-7811UTC | USB 2.0 |
Edimax EW-7822UAC | USB 3.0 |
Elecom WDC-150SU2M | USB 2.0 |
EnGenius EUB1200AC | USB 3.0 |
Hawking HD65U | USB 2.0 |
Hercules Wireless N USB Pico | USB 2.0 |
I-O Data WN-AC867U | USB 3.0 |
Linksys WUSB6300 | USB 3.0 |
NEC AtermWL900U PA-WL900U | USB 3.0 |
Netgear A6100 | USB 2.0 |
Netgear WNA1000M | USB 2.0 |
Planex GW-900D | USB 3.0 |
Realtek RTL8192CU | USB 2.0 |
Realtek RTL8188CUS | USB 2.0 |
Sitecom WLA-7100 | USB 3.0 |
TP-Link Archer T4U | USB 3.0 |
TP-LINK TL-WN723N v3 | USB 2.0 |
TP-LINK TL-WN725N v2 | USB 2.0 |
TP-LINK TL-WN821N v4 | USB 2.0 |
TP-LINK TL-WN821N v5 | USB 2.0 |
TP-LINK TL-WN822N v4 | USB 2.0 |
TP-LINK TL-WN823N v1 | USB 2.0 |
TP-LINK TL-WN823N v2 | USB 2.0 |
TRENDnet TEW-805UB | USB 3.0 |
ZyXEL NWD6605 | USB 3.0 |
SEE ALSO
BUGS
The rtwn_usb
driver does not support any
of the 802.11ac capabilities offered by the adapters. Additional work is
required in
ieee80211(9) before those features can be supported.