NAME
miibus —
IEEE 802.3 Media Independent Interface
network bus
SYNOPSIS
For most network interface cards (NIC):
device miibus
DESCRIPTION
Themiibus driver provides an interconnection between
the Media Access Control (MAC) sublayer, the Physical Layer entities (PHY),
Station Management (STA) entities, and the PHY Layer as defined by the IEEE
802.3 Standard.
The miibus layer allows network device
drivers to share common support code for various external PHY devices. Most
10/100 network interface cards either use an MII transceiver or have
built-in transceivers that can be programmed using an MII interface. The
miibus driver currently handles all of the media
detection, selection, and reporting using the ifmedia interface. A generic
driver has been included for all PHYs that are not handled by a specific
driver, this is possible because all 10/100 PHYs implement the same general
register set along with their vendor specific register set.
The following network device drivers use the
miibus interface:
- ae(4)
- Attansic/Atheros L2 Fast Ethernet
- age(4)
- Attansic/Atheros L1 Gigabit Ethernet
- alc(4)
- Atheros AR8131/AR8132 PCIe Ethernet
- ale(4)
- Atheros AR8121/AR8113/AR8114 PCIe Ethernet
- aue(4)
- ADMtek USB Ethernet
- axe(4)
- ASIX Electronics AX88172 USB Ethernet
- axge(4)
- ASIX Electronics AX88178A/AX88179 USB Ethernet
- bce(4)
- Broadcom NetXtreme II Gigabit Ethernet
- bfe(4)
- Broadcom BCM4401 Ethernet
- bge(4)
- Broadcom BCM570xx Gigabit Ethernet
- cas(4)
- Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn
- dc(4)
- DEC/Intel 21143 and various workalikes
- ed(4)
- NE[12]000, SMC Ultra, 3c503, DS8390 cards
- et(4)
- Agere ET1310 Gigabit Ethernet
- fxp(4)
- Intel EtherExpress PRO/100B
- gem(4)
- Sun ERI, Sun GEM and Apple GMAC Ethernet
- hme(4)
- Sun HME Ethernet
- jme(4)
- JMicron JMC250 Gigabit/JMC260 Fast Ethernet
- lge(4)
- Level 1 LXT1001 NetCellerator Gigabit Ethernet
- msk(4)
- Marvell/SysKonnect Yukon II Gigabit Ethernet
- nfe(4)
- NVIDIA nForce MCP Networking Adapter
- nge(4)
- National Semiconductor DP83820/DP83821 Gigabit Ethernet
- pcn(4)
- AMD Am79C97x PCI 10/100
- re(4)
- RealTek 8139C+/8169/8169S/8110S
- rl(4)
- RealTek 8129/8139
- rue(4)
- RealTek RTL8150 USB To Fast Ethernet
- sf(4)
- Adaptec AIC-6915
- sge(4)
- Silicon Integrated Systems SiS190/191 Ethernet
- sis(4)
- Silicon Integrated Systems SiS 900/SiS 7016
- sk(4)
- SysKonnect SK-984x and SK-982x Gigabit Ethernet
- smsc(4)
- SMSC LAN9xxx USB Fast Ethernet
- ste(4)
- Sundance ST201 (D-Link DFE-550TX)
- stge(4)
- Sundance/Tamarack TC9021 Gigabit Ethernet
- tl(4)
- Texas Instruments ThunderLAN
- tx(4)
- SMC EtherPower II (83c170)
- udav(4)
- Davicom DM9601 USB Ethernet
- ure(4)
- RealTek RTL8152 USB To Fast Ethernet
- vge(4)
- VIA VT612x PCI Gigabit Ethernet
- vr(4)
- VIA Rhine, Rhine II
- vte(4)
- DM&P Vortex86 RDC R6040 Fast Ethernet
- wb(4)
- Winbond W89C840F
- xl(4)
- 3Com 3c90x
COMPATIBILITY
The implementation of miibus was
originally intended to have similar API interfaces to
BSD/OS 3.0 and NetBSD, but
as a result are not well behaved newbus device drivers.
SEE ALSO
ae(4), age(4), alc(4), ale(4), arp(4), aue(4), axe(4), axge(4), bce(4), bfe(4), bge(4), cas(4), dc(4), ed(4), et(4), fxp(4), gem(4), hme(4), jme(4), lge(4), msk(4), netintro(4), nfe(4), nge(4), pcn(4), re(4), rgephy(4), rl(4), rue(4), sf(4), sge(4), sis(4), sk(4), smsc(4), ste(4), stge(4), tl(4), tx(4), udav(4), ure(4), vge(4), vr(4), vte(4), wb(4), xl(4)
STANDARDS
More information on MII can be found in the IEEE 802.3 Standard.
HISTORY
The miibus driver first appeared in
FreeBSD 3.3.
AUTHORS
This manual page was written by Tom Rhodes <trhodes@FreeBSD.org>.