man.bsd.lv manual page server

DESCRIPTION

Each line in the file (other than comment lines that begin with a #) specifies the mount point(s) and export flags within one local server file system or the NFSv4 tree root for one or more hosts. A long line may be split over several lines by ending all but the last line with a backslash (‘\’). A host may be specified only once for each local file or the NFSv4 tree root on the server and there may be only one default entry for each server file system that applies to all other hosts. The latter exports the file system to the “world” and should be used only when the file system contains public information.

In a mount entry, the first field(s) specify the directory path(s) within a server file system that can be mounted on by the corresponding client(s). There are three forms of this specification. The first is to list all mount points as absolute directory paths separated by whitespace. This list of directory paths should be considered an “administrative control”, since it is only enforced by the mountd(8) daemon and not the kernel. As such, it only applies to NFSv2 and NFSv3 mounts and only with respect to the client's use of the mount protocol. The second is to specify the pathname of the root of the file system followed by the -alldirs flag; this form allows the host(s) to mount at any point within the file system, including regular files if the -r option is used on mountd(8). Because NFSv4 does not use the mount protocol, the “administrative controls” are not applied and all directories within this server file system are mountable via NFSv4 even if the -alldirs flag has not been specified. The third form has the string ``V4:'' followed by a single absolute path name, to specify the NFSv4 tree root. This line does not export any file system, but simply marks where the root of the server's directory tree is for NFSv4 clients. The exported file systems for NFSv4 are specified via the other lines in the exports file in the same way as for NFSv2 and NFSv3. The pathnames must not have any symbolic links in them and should not have any “.” or “..” components. Mount points for a file system may appear on multiple lines each with different sets of hosts and export options.

The second component of a line specifies how the file system is to be exported to the host set. The option flags specify whether the file system is exported read-only or read-write and how the client UID is mapped to user credentials on the server. For the NFSv4 tree root, the only option that can be specified in this section is -sec.

Export options are specified as follows:

-maproot=user The credential of the specified user is used for remote access by root. The credential includes all the groups to which the user is a member on the local machine (see id(1)). The user may be specified by name or number. The user string may be quoted, or use backslash escaping.

-maproot=user:group1:group2:... The colon separated list is used to specify the precise credential to be used for remote access by root. The elements of the list may be either names or numbers. Note that user: should be used to distinguish a credential containing no groups from a complete credential for that user. The group names may be quoted, or use backslash escaping.

-mapall=user or -mapall=user:group1:group2:... specifies a mapping for all client UIDs (including root) using the same semantics as -maproot.

The option -r is a synonym for -maproot in an effort to be backward compatible with older export file formats.

In the absence of -maproot and -mapall options, remote accesses by root will result in using a credential of 65534:65533. All other users will be mapped to their remote credential. If a -maproot option is given, remote access by root will be mapped to that credential instead of 65534:65533. If a -mapall option is given, all users (including root) will be mapped to that credential in place of their own.

-sec=flavor1:flavor2... specifies a colon separated list of acceptable security flavors to be used for remote access. Supported security flavors are sys, krb5, krb5i and krb5p. If multiple flavors are listed, they should be ordered with the most preferred flavor first. If this option is not present, the default security flavor list of just sys is used.

The -ro option specifies that the file system should be exported read-only (default read/write). The option -o is a synonym for -ro in an effort to be backward compatible with older export file formats.

WebNFS exports strictly according to the spec (RFC 2054 and RFC 2055) can be done with the -public flag. However, this flag in itself allows r/w access to all files in the file system, not requiring reserved ports and not remapping UIDs. It is only provided to conform to the spec, and should normally not be used. For a WebNFS export, use the -webnfs flag, which implies -public, -mapall=nobody and -ro. Note that only one file system can be WebNFS exported on a server.

A -index=file option can be used to specify a file whose handle will be returned if a directory is looked up using the public filehandle (WebNFS). This is to mimic the behavior of URLs. If no -index option is specified, a directory filehandle will be returned as usual. The -index option only makes sense in combination with the -public or -webnfs flags.

Specifying the -quiet option will inhibit some of the syslog diagnostics for bad lines in /etc/exports. This can be useful to avoid annoying error messages for known possible problems (see EXAMPLES below).

The third component of a line specifies the host set to which the line applies. The set may be specified in three ways. The first way is to list the host name(s) separated by white space. (Standard Internet “dot” addresses may be used in place of names.) The second way is to specify a “netgroup” as defined in the netgroup file (see netgroup(5)). The third way is to specify an Internet subnetwork using a network and network mask that is defined as the set of all hosts with addresses within the subnetwork. This latter approach requires less overhead within the kernel and is recommended for cases where the export line refers to a large number of clients within an administrative subnet.

The first two cases are specified by simply listing the name(s) separated by whitespace. All names are checked to see if they are “netgroup” names first and are assumed to be hostnames otherwise. Using the full domain specification for a hostname can normally circumvent the problem of a host that has the same name as a netgroup. The third case is specified by the flag -network=netname[/prefixlength] and optionally -mask=netmask. The netmask may be specified either by attaching a prefixlength to the -network option, or by using a separate -mask option. If the mask is not specified, it will default to the mask for that network class (A, B or C; see inet(4)). See the EXAMPLES section below.

Scoped IPv6 address must carry scope identifier as documented in inet6(4). For example, “fe80::%re2/10” is used to specify fe80::/10 on re2 interface.

For the third form which specifies the NFSv4 tree root, the directory path specifies the location within the server's file system tree which is the root of the NFSv4 tree. There can only be one NFSv4 root directory per server. As such, all entries of this form must specify the same directory path. For file systems other than ZFS, this location can be any directory and does not need to be within an exported file system. If it is not in an exported file system, a very limited set of operations are permitted, so that an NFSv4 client can traverse the tree to an exported file system. Although parts of the NFSv4 tree can be non-exported, the entire NFSv4 tree must consist of local file systems capable of being exported via NFS. All ZFS file systems in the subtree below the NFSv4 tree root must be exported. NFSv4 does not use the mount protocol and does permit clients to cross server mount point boundaries, although not all clients are capable of crossing the mount points.

The -sec option on these line(s) specifies what security flavors may be used for NFSv4 operations that do not use file handles. Since these operations (SetClientID, SetClientIDConfirm, Renew, DelegPurge and ReleaseLockOnwer) allocate/modify state in the server, it is possible to restrict some clients to the use of the krb5[ip] security flavors, via this option. See the EXAMPLES section below. This third form is meaningless for NFSv2 and NFSv3 and is ignored for them.

The mountd(8) utility can be made to re-read the exports file by sending it a hangup signal as follows:

/etc/rc.d/mountd reload

After sending the SIGHUP, check the syslogd(8) output to see whether mountd(8) logged any parsing errors in the exports file.

/usr /usr/local -maproot=0:10 friends
/usr -maproot=daemon grumpy.cis.uoguelph.ca 131.104.48.16
/usr -ro -mapall=nobody
/u -maproot=bin: -network 131.104.48 -mask 255.255.255.0
/a -network 192.168.0/24
/a -network 3ffe:1ce1:1:fe80::/64
/u2 -maproot=root friends
/u2 -alldirs -network cis-net -mask cis-mask
/cdrom -alldirs,quiet,ro -network 192.168.33.0 -mask 255.255.255.0
/private -sec=krb5i
/secret -sec=krb5p
V4: /	-sec=krb5:krb5i:krb5p -network 131.104.48 -mask 255.255.255.0
V4: /	-sec=sys:krb5:krb5i:krb5p grumpy.cis.uoguelph.ca