man.bsd.lv manual page server

Manual Page Search Parameters

CONFIG(5) File Formats Manual CONFIG(5)

configkernel configuration file format

A kernel configuration file specifies the configuration of a FreeBSD kernel. It is processed by config(8) to create a build environment where a kernel may be built using make(1).

A kernel configuration file comprises a sequence of specification directives.

A specification directive starts with a keyword at the beginning of the line and is followed by additional parameters.

A specification directive may be terminated by a semicolon ‘;’ or by a newline. Long input lines may be broken into shorter lines by starting the second and subsequent lines with a white space character.

Case is significant, “machine” and “MACHINE” are different tokens.

A double quote character ‘"’ starts a quoted string. All characters up to the next quote character form the value of the quoted string. A ‘"’ character may be inserted into a quoted string by using the sequence ‘\"’.

Numbers are specified using C-style syntax.

A ‘#’ character starts a comment; all characters from the ‘#’ character till the end of the current line are ignored.

Whitespace between tokens is ignored, except inside quoted strings. Whitespace following a comment line is ignored.

Kernel configuration directives may appear in any order in a kernel configuration file. Directives are processed in order of appearance with subsequent directive lines overriding the effect of prior ones.

The list of keywords and their meanings are as follows:

cputype
Specify the CPU this kernel will run on. There can be more than one cpu directive in a configuration file. The allowed list of CPU names is architecture specific and is defined in the file sys/conf/options.arch⟩.

name [, name [...]]
 
name [, name [...]]
Configures the specified devices for inclusion into the kernel image. Devices that are common to all architectures are defined in the file sys/conf/files. Devices that are specific to architecture arch are defined in the file sys/conf/files.arch⟩.

filename
Specifies a filename containing a kernel environment definition.

The kernel will augment this compiled-in environment with the environment prepared for it at boot time by loader(8). Environment variables specified in the loader(8) environment will take precedence over environment variables specified in filename, and environment variables specified in the dynamic environment take precedence over both of these.

loader_env.disabled=1 may be specified in the static environment to disable the loader(8) environment. Disabling the loader(8) should be done with caution and due consideration for whether or not it supplies environment variables needed for properly booting the system.

static_env.disabled=1 may be specified in the loader(8) environment to disable use of the static environment. This option has no effect if specified in any environment after the loader(8) environment is processed. This option is not usable in conjunction with loader_env.disabled.

This directive is useful for setting kernel tunables in embedded environments that do not start from loader(8).

All env and envvar directives will be processed and added to the static environment in reversed order of appearance so that later specified variables properly override earlier specified variables. Note that within filename, the first appearance of a given variable will be the first one seen by the kernel, effectively shadowing any later appearances of the same variable within filename.

setting
Specifies an individual environment setting to be added to the kernel's compiled-in environment. setting must be of the form “name=value”. Optional quotes are supported in both name and value.

All env and envvar directives will be processed and added to the static environment in reversed order of appearance so that later specified variables properly override earlier specified variables.

filename
Specifies a file containing a list of files specific to that kernel configuration file (a la files.arch⟩).

filename
Specifies a file to load a static device configuration specification from. From FreeBSD 5.0 onwards, the kernel reads the system's device configuration at boot time (see device.hints(5)). This directive configures the kernel to use the static device configuration listed in filename.

Hints provided in this static device configuration will be overwritten in the order in which they're encountered. Hints in the compiled-in environment takes precedence over compiled-in hints, and hints in the environment prepared for the kernel by loader(8) takes precedence over hints in the compiled-in environment.

Once the dynamic environment becomes available, all compiled-in hints will be added to the dynamic environment if they do not already have an override in the dynamic environment. The dynamic environment will then be used for all searches of hints.

static_hints.disabled=1 may be specified in either a compiled-in environment or the loader(8) environment to disable use of these hints files. This option has no effect if specified in any environment after the loader(8) environment is processed.

The file filename must conform to the syntax specified by device.hints(5). Multiple hints lines are allowed. The resulting hints will be the files concatenated in reverse order of appearance so that hints in later files properly override hints in earlier files.

name
Set the kernel name to name. At least one ident directive is required.

filename
Read subsequent text from file filename and return to the current file after filename is successfully processed.

arch [cpuarch]
Specifies the architecture of the machine the kernel is being compiled for. Legal values for arch include:

The DEC Alpha architecture.
The ARM architecture.
The AMD x86-64 architecture.
The Intel x86 based PC architecture.
The MIPS architecture.
The IBM PowerPC architecture.
The Sun Sparc64 architecture.

If argument cpuarch is specified, it points config(8) to the cpu architecture of the machine. When cpuarch is not specified, it is assumed to be the same as arch. arch corresponds to MACHINE. cpuarch corresponds to MACHINE_ARCH.

A kernel configuration file may have only one machine directive.

options
 
options
Add options to the generated makefile.

The options argument is a comma separated list of one or more option specifications. Each option specification has the form

MakeVariableName[=Value]
MakeVariableName+=Value

and results in the appropriate make(1) variable definition being inserted into the generated makefile. If only the name of the make(1) variable is specified, value is assumed to be the empty string.

Example:

makeoptions MYMAKEOPTION="foo"
makeoptions MYMAKEOPTION+="bar"
makeoptions MYNULLMAKEOPTION

number
This optional directive is used to configure the size of some kernel data structures. The parameter number can be 0 (the default) or an integer greater than or equal to 2. A value of 0 indicates that the kernel should configure its data structures according to the size of available physical memory. If auto configuration is requested, the kernel will set this tunable to a value between 32 and 384.

As explained in tuning(7), this tunable can also be set at boot time using loader(8).

cputype
Remove the specified CPU from the list of previously selected CPUs. This directive can be used to cancel the effect of cpu directives in files included using include.

name [, name [...]]
 
name [, name [...]]
Remove the specified devices from the list of previously selected devices. This directive can be used to cancel the effects of device or devices directives in files included using include.

name
 
name
Removes previously defined make(1) option name from the kernel build. This directive can be used to cancel the effects of makeoption directives in files included using include.

name [, name [...]]
 
name [, name [...]]
Remove the specified kernel options from the list of previously defined options. This directive can be used to cancel the effects of option or options directives in files included using include.

optionspec [, optionspec [...]]
 
optionspec [, optionspec [...]]
Add compile time kernel options to the kernel build. Each option specification has the form

name[=value]

If value is not specified, it is assumed to be NULL. Options common to all architectures are specified in the file sys/conf/options. Options specific to architecture arch are specified in the file sys/conf/options.arch⟩.

number
Enables kernel profiling if number is non-zero. If number is 2 or greater, the kernel is configured for high-resolution profiling. Kernels can also be built for profiling using the -p option to config(8).

The following kernel configuration directives are obsolete.

This directive was used to specify the device to be used for the root file system. From FreeBSD 4.0 onwards, this information is passed to a booting kernel by loader(8).

sys/compile/NAME
Compile directory created from a kernel configuration.
sys/conf/Makefile.arch
Makefile fragments for architecture arch.
sys/conf/files
Devices common to all architectures.
sys/conf/files.arch
Devices for architecture arch.
sys/conf/options
Options common to all architectures.
sys/conf/options.arch
Options for architecture arch.

kenv(1), make(1), device.hints(5), loader.conf(5), config(8), kldload(8), loader(8)

Samuel J. Leffler and Michael J. Karels, Building 4.4BSD Kernels with Config.

The config(8) utility first appeared in 4.1BSD, and was subsequently revised in 4.4BSD.

The kernel configuration mechanism changed further in FreeBSD 4.0 and FreeBSD 5.0, moving toward an architecture supporting dynamic kernel configuration.

July 11, 2018 FreeBSD-12.0