NAME
usb_template —
USB device side templates
SYNOPSIS
To compile this module into the kernel, place the following line in your kernel configuration file:
device usb_templateTo load the module at boot time, place the following line in loader.conf(5):
usb_template_load="YES"
DESCRIPTION
Theusb_template module implements various USB templates
that are needed when programming an USB device side driver. A USB template
consists of an USB device descriptor, one or more USB configuration
descriptors, one or more USB interface descriptors, one or more USB endpoint
descriptors, USB strings and additional USB descriptors. USB templates are
selected using the hw.usb.template sysctl and tunable,
or by using the
usbconfig(8) set_template subcommand. Changing
the hw.usb.template sysctl triggers reenumeration by the
USB host; changes to other sysctls may not be visible to the host until
reenumeration is performed.
Available templates are:
| Value | Description |
0 |
USB Mass Storage |
1 |
CDC Ethernet |
2 |
Media Transfer Protocol (MTP) |
3 |
USB serial port |
4 |
USB audio |
5 |
USB keyboard |
6 |
USB mouse |
7 |
USB phone |
8 |
CDC Ethernet and serial port |
9 |
USB MIDI |
SYSCTL VARIABLES
The following variables are available as both sysctl(8) variables and loader(8) tunables:
- hw.usb.template
- Currently selected template. Set to -1 to make the device disappear from the USB host point of view.
- hw.usb.templates.N
- Configuration for template number N.
- hw.usb.templates.N.vendor_id
- 16-bit vendor identifier (VID), usually assigned by USB-IF.
- hw.usb.templates.N.product_id
- 16-bit product identifier (PID).
- hw.usb.templates.N.manufacturer
- String containing human-readable manufacturer name.
- hw.usb.templates.N.product
- String containing human-readable product name.
SEE ALSO
STANDARDS
The usb_template module complies to the
USB 1.0, 2.0 and 3.0 standard.
HISTORY
The usb_template module was written by
Hans Petter Selasky
<hselasky@FreeBSD.org>.