man.bsd.lv manual page server

Execution and Tracing Commands

run [args] [< filename] [> filename]

 

rerun [args] [< filename] [> filename]

Start executing objfile, passing args as command line arguments; < or > can be used to redirect input or output in the usual manner. When rerun is used without any arguments the previous argument list is passed to the program; otherwise it is identical to run. If objfile has been written since the last time the symbolic information was read in, dbx will read in the new information.

trace [in procedure/function] [if condition]

 

trace source-line-number [if condition]

 

trace procedure/function [in procedure/function] [if condition]

 

trace expression at source-line-number [if condition]

 

trace variable [in procedure/function] [if condition]

Have tracing information printed when the program is executed. A number is associated with the command that is used to turn the tracing off (see the delete command).

The first argument describes what is to be traced. If it is a source-line-number, then the line is printed immediately prior to being executed. Source line numbers in a file other than the current one must be preceded by the name of the file in quotes and a colon, e.g. "mumble.p":17.

If the argument is a procedure or function name then every time it is called, information is printed telling what routine called it, from what source line it was called, and what parameters were passed to it. In addition, its return is noted, and if it's a function then the value it is returning is also printed.

If the argument is an expression with an at clause then the value of the expression is printed whenever the identified source line is reached.

If the argument is a variable then the name and value of the variable is printed whenever it changes. Execution is substantially slower during this form of tracing.

If no argument is specified then all source lines are printed before they are executed. Execution is substantially slower during this form of tracing.

The clause in procedure/function restricts tracing information to be printed only while executing inside the given procedure or function.

Condition is a boolean expression and is evaluated prior to printing the tracing information; if it is false then the information is not printed.

stop if condition

 

stop at source-line-number [if condition]

 

stop in source-line-number [if condition]

 

stop variable [if condition]

Stop execution when the given line is reached, procedure or function called, variable changed, or condition true.

status [> filename]

Print out the currently active trace and stop commands.

delete command-number ...

The traces or stops corresponding to the given numbers are removed. The numbers associated with traces and stops are printed by the status command.

catch number

 

catch signal-name

 

ignore number

 

ignore signal-name

Start or stop trapping a signal before it is sent to the program. This is useful when a program being debugged handles signals such as interrupts. A signal may be specified by number or by a name (e.g., SIGINT). Signal names are case insensitive and the “SIG” prefix is optional. By default all signals are trapped except SIGCONT, SIGCHILD, SIGALRM and SIGKILL.

cont integer

 

cont signal-name

Continue execution from where it stopped. If a signal is specified, the process continues as though it received the signal. Otherwise, the process is continued as though it had not been stopped.

Execution cannot be continued if the process has ``finished'', that is, called the standard procedure ``exit''. Dbx does not allow the process to exit, thereby letting the user to examine the program state.

step

Execute one source line.

next

Execute up to the next source line. The difference between this and step is that if the line contains a call to a procedure or function the step command will stop at the beginning of that block, while the next command will not.

return [procedure]

Continue until a return to procedure is executed, or until the current procedure returns if none is specified.

call procedure(parameters)

Execute the object code associated with the named procedure or function.

Printing Variables and Expressions

Names are resolved first using the static scope of the current function, then using the dynamic scope if the name is not defined in the static scope. If static and dynamic searches do not yield a result, an arbitrary symbol is chosen and the message “[using qualified name]” is printed. The name resolution procedure may be overridden by qualifying an identifier with a block name, e.g., “module.variable” For C, source files are treated as modules named by the file name without ``.c''.

Expressions are specified with an approximately common subset of C and Pascal (or equivalently Modula-2) syntax. Indirection can be denoted using either a prefix ``*'' or a postfix ``^'' and array expressions are subscripted by brackets (“[]”) The field reference operator (``.'') can be used with pointers as well as records, making the C operator ``->'' unnecessary (although it is supported).

Types of expressions are checked; the type of an expression may be overridden by using “type-name(expression)”. When there is no corresponding named type the special constructs “&type-name” and “$$tag-name” can be used to represent a pointer to a named type or C structure tag.

assign variable = expression

Assign the value of the expression to the variable.

dump [procedure] [> filename]

Print the names and values of variables in the given procedure, or the current one if none is specified. If the procedure given is ``.'', then the all active variables are dumped.

print expression [, expression ...]

Print out the values of the expressions.

whatis name

Print the declaration of the given name, which may be qualified with block names as above.

which identifier

Print the full qualification of the given identifer, i.e. the outer blocks that the identifier is associated with.

up [count]

 

down [count]

Move the current function, which is used for resolving names, up or down the stack count levels. The default count is 1.

where

Print out a list of the active procedures and function.

whereis identifier

Print the full qualification of all the symbols whose name matches the given identifier. The order in which the symbols are printed is not meaningful.

Accessing Source Files

/ regular expression[/]

 

? regular expression[]?

Search forward or backward in the current source file for the given pattern.

edit [filename]

 

edit procedure/function-name

Invoke an editor on filename or the current source file if none is specified. If a procedure or function name is specified, the editor is invoked on the file that contains it. Which editor is invoked by default depends on the installation. The default can be overridden by setting the environment variable EDITOR to the name of the desired editor.

file [filename]

Change the current source file name to filename. If none is specified then the current source file name is printed.

func [procedure/function]

Change the current function. If none is specified then print the current function. Changing the current function implicitly changes the current source file to the one that contains the function; it also changes the current scope used for name resolution.

list [source-line-number [, source-line-number]]

 

list procedure/function

List the lines in the current source file from the first line number to the second inclusive. If no lines are specified, the next 10 lines are listed. If the name of a procedure or function is given lines n-k to n+k are listed where n is the first statement in the procedure or function and k is small.

use directory-list

Set the list of directories to be searched when looking for source files.

Command Aliases and Variables

alias name name

 

alias name string

 

alias name (parameters) “string”

When commands are processed, dbx first checks to see if the word is an alias for either a command or a string. If it is an alias, then dbx treats the input as though the corresponding string (with values substituted for any parameters) had been entered. For example, to define an alias ``rr'' for the command ``rerun'', one can say

alias rr rerun

To define an alias called ``b'' that sets a stop at a particular line one can say

alias b(x) ``stop at x''

Subsequently, the command ``b(12)'' will expand to ``stop at 12''.

set name [= expression]

The set command defines values for debugger variables. The names of these variables cannot conflict with names in the program being debugged, and are expanded to the corresponding expression within other commands. The following variables have a special meaning:

$frame

Setting this variable to an address causes dbx to use the stack frame pointed to by the address for doing stack traces and accessing local variables. This facility is of particular use for kernel debugging.

$hexchars

 

$hexints

 

$hexoffsets

 

$hexstrings

When set, dbx prints out out characters, integers, offsets from registers, or character pointers respectively in hexadecimal.

$listwindow

The value of this variable specifies the number of lines to list around a function or when the list command is given without any parameters. Its default value is 10.

$mapaddrs

Setting (unsetting) this variable causes dbx to start (stop) mapping addresses. As with ``$frame'', this is useful for kernel debugging.

$unsafecall

 

$unsafeassign

When ``$unsafecall'' is set, strict type checking is turned off for arguments to subroutine or function calls ( e .g. in the call statement). When ``$unsafeassign'' is set, strict type checking between the two sides of an assign statement is turned off. These variables should be used only with great care, because they severely limit dbx's usefulness for detecting errors.

unalias name

Remove the alias with the given name.

unset name

Delete the debugger variable associated with name.

Machine Level Commands

tracei [address] [if cond]

 

tracei [variable] [at address] [if cond]

 

stopi [address] [if cond]

 

stopi [at] [address] [if cond]

Turn on tracing or set a stop using a machine instruction address.

stepi

 

nexti

Single step as in step or next, but do a single instruction rather than source line.

address,address/[mode]

 

address/[count] [mode]

Print the contents of memory starting at the first address and continuing up to the second address or until count items are printed. If the address is ``.'', the address following the one printed most recently is used. The mode specifies how memory is to be printed; if it is omitted the previous mode specified is used. The initial mode is ``X''. The following modes are supported:

i

Print the machine instruction.

d

Print a short word in decimal.

D

Print a long word in decimal.

o

Print a short word in octal.

O

Print a long word in octal.

x

Print a short word in hexadecimal.

X

Print a long word in hexadecimal.

b

Print a byte in octal.

c

Print a byte as a character.

s

Print a string of characters terminated by a null byte.

f

Print a single precision real number.

g

Print a double precision real number.

Symbolic addresses are specified by preceding the name with an ``&''. Registers are denoted by ``$rN'' where N is the number of the register. Addresses may be expressions made up of other addresses and the operators ``+'', ``-'', and indirection (unary ``*'').

Miscellaneous Commands

gripe

Invoke a mail program to send a message to the person in charge of dbx.

help

Print out a synopsis of dbx commands.

quit

Exit dbx.

sh command-line

Pass the command line to the shell for execution. The SHELL environment variable determines which shell is used.

source filename

Read dbx commands from the given filename.