man.bsd.lv manual page server

Manual Page Search Parameters

WRITE(2) System Calls Manual WRITE(2)

write, writev, pwrite, pwritev, extpwrite, extpwritevwrite output

library “libc”

#include <sys/types.h>
#include <sys/uio.h>
#include <unistd.h>

ssize_t
write(int d, const void *buf, size_t nbytes);

ssize_t
writev(int d, const struct iovec *iov, int iovcnt);

ssize_t
pwrite(int d, const void *buf, size_t nbytes, off_t offset);

ssize_t
pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset);

ssize_t
extpwrite(int d, const void *buf, size_t nbytes, int flags, off_t offset);

ssize_t
extpwritev(int d, const struct iovec *iov, int iovcnt, int flags, off_t offset);

() attempts to write nbytes of data to the object referenced by the descriptor d from the buffer pointed to by buf. Writev() and pwritev() perform the same action, but gather the output data from the iovcnt buffers specified by the members of the iov array: iov[0], iov[1], ..., iov[iovcnt-1]. () and pwritev() perform the same function, but write to the specified position in the file without modifying the file pointer.

For () and (), the iovec structure is defined as:

struct iovec {
	char   *iov_base;  /* Base address. */
	size_t iov_len;    /* Length. */
};

Each iovec entry specifies the base address and length of an area in memory from which data should be written. () and () will always write a complete area before proceeding to the next.

The () and () allow a flags argument to also be passed in, controlling blocking/non-blocking and other features on a call-by-call basis, ignoring the related default for the descriptor. Allowed flags are:

Force the system call to operate in a blocking fashion.
Force the system call to operate in a non-blocking fashion.
Force append mode for the operation.
Force offset mode for the operation.
Force the system call to issue the write synchronously.
Force the system call to issue the write asynchronously.

On objects capable of seeking, the () starts at a position given by the pointer associated with d, see lseek(2). Upon return from write(), the pointer is incremented by the number of bytes which were written.

Objects that are not capable of seeking always write from the current position. The value of the pointer associated with such an object is undefined.

If the real user is not the super-user, then () clears the set-user-id bit on a file. This prevents penetration of system security by a user who “captures” a writable set-user-id file owned by the super-user.

When using non-blocking I/O on objects such as sockets that are subject to flow control, () and writev() may write fewer bytes than requested; the return value must be noted, and the remainder of the operation should be retried when possible.

Upon successful completion the number of bytes which were written is returned. Otherwise a -1 is returned and the global variable errno is set to indicate the error.

Write(), writev(), pwrite(), pwritev(), extpwrite() and extpwritev() will fail and the file pointer will remain unchanged if:

[]
D is not a valid descriptor open for writing.
[]
An attempt is made to write to a pipe that is not open for reading by any process.
[]
An attempt is made to write to a socket of type SOCK_STREAM that is not connected to a peer socket.
[]
An attempt was made to write a file that exceeds the process's file size limit or the maximum file size.
[]
Part of iov or data to be written to the file points outside the process's allocated address space.
[]
The pointer associated with d was negative.
[]
There is no free space remaining on the file system containing the file.
[]
The user's quota of disk blocks on the file system containing the file has been exhausted.
[]
An I/O error occurred while reading from or writing to the file system.
[]
A signal interrupted the write before it could be completed.
[]
The file was marked for non-blocking I/O, and no data could be written immediately.
[]
An attempt was made to write over a disk label area at the beginning of a disk. Use disklabel(8) -W to enable writing on the disk label area.

In addition, writev() pwritev(), and extpwritev() may return one of the following errors:

[]
The destination is no longer available when writing to a UNIX domain datagram socket on which connect(2) had been used to set a destination address.
[]
Iovcnt was less than or equal to 0, or greater than UIO_MAXIOV.
[]
One of the iov_len values in the iov array was negative.
[]
The sum of the iov_len values in the iov array overflowed a 32-bit integer.
[]
The mbuf pool has been completely exhausted when writing to a socket.

The pwrite(), pwritev(), extpwrite() and extpwritev() calls may also return the following errors:

[]
The specified file offset is invalid.
[]
The file descriptor is associated with a pipe, socket, or FIFO.

fcntl(2), lseek(2), open(2), pipe(2), select(2)

The write() function call is expected to conform to IEEE Std 1003.1-1990 (“POSIX.1”). The writev() and pwrite() functions are expected to conform to X/Open Portability Guide Issue 4, Version 2 (“XPG4.2”).

The extpwrite() and extpwritev() functions are DragonFly specific extensions.

The pwritev() function call was added in DragonFly 1.5. The pwrite() function call appeared in AT&T System V Release 4 UNIX. The writev() function call appeared in 4.2BSD. A write() function call appeared in Version 6 AT&T UNIX.

March 2, 2018 DragonFly-5.6.1