usbconfig(8) - Manual pages

NAME

usbconfig — configure the USB subsystem

usbconfig [-u unit] [-a addr] [cmds...]

usbconfig [-d [ugen]<unit>.<addr>] [cmds...]

The usbconfig utility is used to configure and dump information about the USB subsystem.

The options are as follows:

-u unit: Limit device range to USB devices connected to the given USBUS unit.
-a addr: Limit device range to the given USB device index. Should only be used in conjunction with the unit argument.
-d [ugen]<unit>.<addr>: Limit device range to USB devices connected to the given unit and address. The unit and address coordinates may be prefixed by the lowercased word "ugen".
-h: Show help and available commands.

When called without options, usbconfig prints a list of all available USB devices.

Show information about the device on USB bus 1 at address 2:

usbconfig -u 1 -a 2
  dump_info

Dump HID descriptor for device on USB bus 1 at address 2:

usbconfig -u 1 -a 2 do_request 0x81
  0x06 0x2200 0 0x100

Dump string descriptor at index Z for device on USB bus 1 at address 2:

usbconfig -u 1 -a 2 dump_string
  Z

Dump current configuration descriptor for device on USB bus 1 at address 2:

usbconfig -u 1 -a 2
  dump_curr_config_desc

Dump device descriptor for device on USB bus 1 at address 2:

usbconfig -u 1 -a 2
  dump_device_desc

Program the device on USB bus 1 at address 2 to suspend, resume, power off, go into power save, or power on:

usbconfig -u 1 -a 2
  suspend

usbconfig -u 1 -a 2
  resume

usbconfig -u 1 -a 2
  power_off

usbconfig -u 1 -a 2
  power_save

usbconfig -u 1 -a 2
  power_on

Display a list of available quirk names:

usbconfig
  dump_quirk_names

See usb_quirk(4) for more information on quirks.