man.bsd.lv manual page server

DESCRIPTION

The following options are available:

-d

Turn on debugging.

-l

Turn on logging of successful connections.

-w

Turn on TCP Wrapping for external services. See the IMPLEMENTATION NOTES section for more information on TCP Wrappers support.

-W

Turn on TCP Wrapping for internal services which are built into inetd.

-c maximum

Specify the default maximum number of simultaneous invocations of each service; the default is unlimited. May be overridden on a per-service basis with the "max-child" parameter.

-C rate

Specify the default maximum number of times a service can be invoked from a single IP address in one minute; the default is unlimited. May be overridden on a per-service basis with the "max-connections-per-ip-per-minute" parameter.

-R rate

Specify the maximum number of times a service can be invoked in one minute; the default is 256. A rate of 0 allows an unlimited number of invocations.

-s maximum

Specify the default maximum number of simultaneous invocations of each service from a single IP address; the default is unlimited. May be overridden on a per-service basis with the "max-child-per-ip" parameter.

-a

Specify one specific IP address to bind to. Alternatively, a hostname can be specified, in which case the IPv4 or IPv6 address which corresponds to that hostname is used. Usually a hostname is specified when inetd is run inside a jail(8), in which case the hostname corresponds to the jail(8) environment.

When hostname specification is used and both IPv4 and IPv6 bindings are desired, one entry with the appropriate protocol type for each binding is required for each service in /etc/inetd.conf. For example, a TCP-based service would need two entries, one using “tcp4” for the protocol and the other using “tcp6”. See the explanation of the /etc/inetd.conf protocol field below.

-p

Specify an alternate file in which to store the process ID.

Upon execution, inetd reads its configuration information from a configuration file which, by default, is /etc/inetd.conf. There must be an entry for each field of the configuration file, with entries for each field separated by a tab or a space. Comments are denoted by a “#” at the beginning of a line. There must be an entry for each field. The fields of the configuration file are as follows:

service name
socket type
protocol
{wait|nowait}[/max-child[/max-connections-per-ip-per-minute[/max-child-per-ip]]]
user[:group][/login-class]
server program
server program arguments

To specify an ONC RPC-based service, the entry would contain these fields:

service name/version
socket type
rpc/protocol
user[:group][/login-class]
server program
server program arguments

There are two types of services that inetd can start: standard and TCPMUX. A standard service has a well-known port assigned to it; it may be a service that implements an official Internet standard or is a BSD-specific service. As described in RFC 1078, TCPMUX services are nonstandard services that do not have a well-known port assigned to them. They are invoked from inetd when a program connects to the “tcpmux” well-known port and specifies the service name. This feature is useful for adding locally-developed servers. TCPMUX requests are only accepted when the multiplexor service itself is enabled, above and beyond and specific TCPMUX-based servers; see the discussion of internal services below.

The service-name entry is the name of a valid service in the file /etc/services, or the specification of a UNIX domain socket (see below). For “internal” services (discussed below), the service name should be the official name of the service (that is, the first entry in /etc/services). When used to specify an ONC RPC-based service, this field is a valid RPC service name in the file /etc/rpc. The part on the right of the “/” is the RPC version number. This can simply be a single numeric argument or a range of versions. A range is bounded by the low version to the high version - “rusers/1-3”. For TCPMUX services, the value of the service-name field consists of the string “tcpmux” followed by a slash and the locally-chosen service name. The service names listed in /etc/services and the name “help” are reserved. Try to choose unique names for your TCPMUX services by prefixing them with your organization's name and suffixing them with a version number.

The socket-type should be one of “stream”, “dgram”, “raw”, “rdm”, or “seqpacket”, depending on whether the socket is a stream, datagram, raw, reliably delivered message, or sequenced packet socket. TCPMUX services must use “stream”.

The protocol must be a valid protocol or “unix”. Examples are “tcp” or “udp”, both of which imply IPv4 for backward compatibility. The names “tcp4” and “udp4” specify IPv4 only. The names “tcp6” and “udp6” specify IPv6 only. The names “tcp46” and “udp46” specify that the entry accepts both IPv4 and IPv6 connections via a wildcard AF_INET6 socket. If it is desired that the service is reachable via T/TCP, one should specify “tcp/ttcp”, which implies IPv4 for backward compatibility. The name “tcp4/ttcp” specifies IPv4 only, while “tcp6/ttcp” specifies IPv6 only. The name “tcp46/ttcp” specify that the entry accepts both IPv6 and IPv6 connections via a wildcard AF_INET6 socket. Rpc based services (for which only IPv4 is supported at this time) are specified with the “rpc/tcp” or “rpc/udp” service type. TCPMUX services must use “tcp”, “tcp4”, “tcp6” or “tcp46”.

The wait/nowait entry specifies whether the server that is invoked by inetd will take over the socket associated with the service access point, and thus whether inetd should wait for the server to exit before listening for new service requests. Datagram servers must use “wait”, as they are always invoked with the original datagram socket bound to the specified service address. These servers must read at least one datagram from the socket before exiting. If a datagram server connects to its peer, freeing the socket so inetd can receive further messages on the socket, it is said to be a “multi-threaded” server; it should read one datagram from the socket and create a new socket connected to the peer. It should fork, and the parent should then exit to allow inetd to check for new service requests to spawn new servers. Datagram servers which process all incoming datagrams on a socket and eventually time out are said to be “single-threaded”. Comsat(8), (biff(1)) and talkd(8) are both examples of the latter type of datagram server. Tftpd(8) is an example of a multi-threaded datagram server.

Servers using stream sockets generally are multi-threaded and use the “nowait” entry. Connection requests for these services are accepted by inetd, and the server is given only the newly-accepted socket connected to a client of the service. Most stream-based services operate in this manner. Stream-based servers that use “wait” are started with the listening service socket, and must accept at least one connection request before exiting. Such a server would normally accept and process incoming connection requests until a timeout. TCPMUX services must use “nowait”.

The maximum number of outstanding child processes (or “threads”) for a “nowait” service may be explicitly specified by appending a “/” followed by the number to the “nowait” keyword. Normally (or if a value of zero is specified) there is no maximum. Otherwise, once the maximum is reached, further connection attempts will be queued up until an existing child process exits. This also works in the case of “wait” mode, although a value other than one (the default) might not make sense in some cases. You can also specify the maximum number of connections per minute for a given IP address by appending a “/” followed by the number to the maximum number of outstanding child processes. Once the maximum is reached, further connections from this IP address will be dropped until the end of the minute. In addition, you can specify the maximum number of simultaneous invocations of each service from a single IP address by appending a “/” followed by the number to the maximum number of outstanding child processes. Once the maximum is reached, further connections from this IP address will be dropped.

The user entry should contain the user name of the user as whom the server should run. This allows for servers to be given less permission than root. Optional group part separated by “:” allows to specify group name different than default group for this user. Optional login-class part separated by “/” allows to specify login class different than default “daemon” login class.

The server-program entry should contain the pathname of the program which is to be executed by inetd when a request is found on its socket. If inetd provides this service internally, this entry should be “internal”.

The server program arguments should be just as arguments normally are, starting with argv[0], which is the name of the program. If the service is provided internally, the service-name of the service (and any arguments to it) or the word “internal” should take the place of this entry.

Currently, the only internal service to take arguments is “auth”. Without options, the service will always return “ERROR : HIDDEN-USER”. The available arguments to this service that alter its behavior are:

-d fallback

Provide a fallback username. If the real “auth” service is enabled (with the -r option discussed below), return this username instead of an error when lookups fail for either socket credentials or the username. If the real “auth” service is disabled, return this username for every request. This is primarily useful when running this service on a NAT machine.

-g

Instead of returning the user's name to the ident requester, report a username made up of random alphanumeric characters, e.g. “c0c993”. The -g flag overrides not only the user names, but also any fallback name, .fakeid or .noident files.

-t sec[.usec]

Specify a timeout for the service. The default timeout is 10.0 seconds.

-r

Offer a real “auth” service, as per RFC 1413. All the remaining flags apply only in this case.

-i

Return numeric user IDs instead of usernames.

-f

If the file .fakeid exists in the home directory of the identified user, report the username found in that file instead of the real username. If the username found in .fakeid is that of an existing user, then the real username is reported. If the -i flag is also given then the username in .fakeid is checked against existing user IDs instead.

-F

same as -f but without the restriction that the username in .fakeid must not match an existing user.

-n

If the file .noident exists in the home directory of the identified user, return “ERROR : HIDDEN-USER”. This overrides any fakeid file which might exist.

-o osname

Use osname instead of the name of the system as reported by uname(3).

The inetd utility also provides several other “trivial” services internally by use of routines within itself. These services are “echo”, “discard”, “chargen” (character generator), “daytime” (human readable time), and “time” (machine readable time, in the form of the number of seconds since midnight, January 1, 1900). All of these services are available in both TCP and UDP versions; the UDP versions will refuse service if the request specifies a reply port corresponding to any internal service. (This is done as a defense against looping attacks; the remote IP address is logged.) For details of these services, consult the appropriate RFC document.

The TCPMUX-demultiplexing service is also implemented as an internal service. For any TCPMUX-based service to function, the following line must be included in inetd.conf:

tcpmux	stream	tcp	nowait	root	internal

When given the -l option inetd will log an entry to syslog each time a connection is accepted, noting the service selected and the IP-number of the remote requester if available. Unless otherwise specified in the configuration file, and in the absence of the -W and -w options, inetd will log to the “daemon” facility.

The inetd utility rereads its configuration file when it receives a hangup signal, SIGHUP. Services may be added, deleted or modified when the configuration file is reread. Except when started in debugging mode, inetd records its process ID in the file /var/run/inetd.pid to assist in reconfiguration.

ftp          stream  tcp   nowait root  /usr/libexec/ftpd        ftpd -l
ntalk        dgram   udp   wait   root  /usr/libexec/ntalkd      ntalkd
telnet       stream  tcp6  nowait root  /usr/libexec/telnetd  telnetd
shell        stream  tcp46  nowait root  /usr/local/sbin/rshd rshd
tcpmux/+date stream  tcp   nowait guest /bin/date                date
tcpmux/phonebook stream tcp nowait guest /usr/local/bin/phonebook phonebook
rstatd/1-3   dgram   rpc/udp wait root  /usr/libexec/rpc.rstatd  rpc.rstatd
/var/run/echo stream unix  nowait root	internal